Advertisement
bizhub C4000i/C3300i
Near Life Display Settings
• To set whether or not to display the life warning of individual consumables.
• When [Do Not Display] is selected, a warning is not displayed at the time of life detection.
However, in CS Remote Care, life warning is normally sent to the center regardless of this setting.
NOTE
▪ The settings of software Dip switch No.227 (bit7) and switch No. 230 (bit3) have priority.
Setting item
Individual consumables
10.4 Software Switch Setting
• To set the operating characteristic of each function from software switch depending on what types of printing are normally made.
<Procedure>
1. Touch [Switch No.] and enter the intended switch number with the 10-key pad.
2. Touch [Bit Assignment].
3. Use [<-] or [->] to select a bit. To set the bit, enter 0 or 1 with the 10-key pad.
4. To set the bit in hex, touch [HEX Assignment] and use the 16key pad and [A] to [F] keys to enter numbers and characters.
5. Touch [Fix].
Software Switch Setting list
The list of the setting values of Software Switch Setting can be print from [Service Mode] -> [List Output] -> [Machine Management List].
NOTE
▪ For switches not mentioned in the list below, use them in the default value unless indicated otherwise.
10.4.1 SW No.012
• Addition of the authentication device
Bit Assignment
00000000
00000010
00000100
Reference
• [Service Mode] -> [Billing Settings] -> [Authentication Device 2]
10.4.2 SW No.033
• Renders some functions, which were available when both administrator authentication and key counter were provided with when using the
vendor, available only with administer authentication.
Bit Assignment
00000000
00000001
Reference
• [Utility] -> [Expert Adjustment]
• [Administrator] -> [System Settings] -> List [list/Counter]
10.4.3 SW No.049
HEX 00 - HEX0A
• The upper limit of copies that can be input through the control panel of this machine is set.
Bit Assignment
00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
HEX 80
• Scan setting only when Sort is selected for a copy cycle to be run with originals placed on the original glass.
Display
Do Not Display
HEX Assignment
00
Standard
02
PKI (NIPRNet)
[Card3] choice is added in Service Mode.
04
PKI (SIPRNet)
[Card3] choice is added in Service Mode.
HEX Assignment
00
Available with the combination of administer authentication
and key counter.
01
Available only with administrator authentication.
HEX Assignment
00
Unlimited
01
1 copy
02
3 copies
03
5 copies
04
9 copies
05
10 copies
06
20 copies
07
30 copies
08
50 copies
09
99 copies
0A
250 copies
Setting value
Details
Details
Details
I-30
I SERVICE MODE > 10. System 2
Default setting
○
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Advertisement
