Advertisement
bizhub C4000i/C3300i
OFF
ON
NOTE
▪ Note that setting Enhanced Security Mode to "ON" disables the following functions.
▪ Print Data Capture (forcibly prohibited when Enhanced Security Mode is set to "ON")
▪ Rewriting instructions of firmware from CS Remote Care, communication of the account track counter information, the
setting renewal of the machine.
▪ Firmware upgrading through Internet ISW (When the Enhanced Security Mode is set to ON, the setting of this function
cannot be changed from "OFF.")
▪ Setting the Enhanced Security Mode "ON" will change the setting values for the following functions. In addition, the indicator of
"not be changed" below indicates that the settings cannot be changed while Enhanced Security Mode is maintained "ON".
Function Name
Password Rules
To apply the password rule to enhance Security.
ProhibitFunctions
To set the function for prohibiting Authentication
operation in order to prevent the unauthorized access.
Confidential Document
To display the status of the Authentication system on
Access Method
the control panel for the Security document access.
Public User Access
To permit use by a public user having no user
registration if user authentication setting has been
made.
User Name List
To display the list key for User names on User
Authentication screen.
Print without
To allow or restrict printing which user and account are
Authentication
not specified.
Counter Remote Control To select whether or not to allow the Center to acquire
counter information managed by the machine when CS
Remote Care is used.
URL display enable
To set whether or not to enable the Scan to URL
setting
function.
Print Simple Auth.
You can print from the printer driver using
(Authentication Setting)
authentication that requires only your user name
(without password).
User Box Administrator
To set whether to allow or restrict the Box Administrator
Setting
to use the system.
SSL
To set whether to encrypt access by SSL.
SSL Encryption Strength To set the SSL encryption strength for the SSL
encryption communication.
Automatically Obtain
-
Certificates of S/MIME
S/MIME Encryption
-
Method
FTP Server
To set whether to use FTP server or not.
Server load reduction
Select the sending method to reduce the load of the E-
transmission method
mail server (SMTP).
SNMPv1/v2c
To use when changing Write setting.
SNMP v3 Security Level
To set the Security level for the Reading/Writing
and auth/priv-password
Authority User which is used for SNMP v3.
Print Data Capture
To set whether to allow or restrict capturing the Print
Job Data.
Network Setting Clear
To clear the network setting through Web Connection.
Setting item
Contents
H UTILITY MODE > 12. Supplementary explanation of utility mode
Default setting
Disable
Mode 1
Mode 1
Restrict
OFF
Restrict
Restrict
ON
Restrict
Restrict
OFF
AES-256,
3DES-168,
RC4-128
No
3DES
ON
OFF
Read/Write
enable
auth/priv-
password
Allow
Enabled
H-24
Default setting
○
When Enhanced Security mode is set to
"ON"
Enable (not to be changed)
Mode 2 (not to be changed): Three times
is set.
* The number of times can be changed to
once, twice, or three times. (It is twice,
four or six times for WebDAV server
password.)
Mode 2 (not to be changed)
* In association with ProhibitFunctions, the
method is changed from "Security using
Secure Document ID and password (Mode
1)" to that using the password with the
"Secure Document first narrowed down by
Security Document ID (Mode 2)."
Restrict (not to be changed)
OFF (not to be changed)
Restrict (not to be changed)
Restrict (not to be changed)
OFF (not to be changed)
Restrict (not to be changed)
Restrict (not to be changed)
ON (not to be changed)
AES/3DES (not to be changed to one
containing strength lower than AES/3DES)
No (not to be changed)
3DES (not to be changed to DES or RC-2)
OFF (not to be changed)
When [Stop URL when max. limit is
exceeded] or [Always Send via URL] is
selected, this option is set to [OFF].
Only Read is enabled (not to be changed)
• The security level can be selected
from among [auth-password] and
[auth/priv-password].
• An 8-digit-or-more auth-password
and priv-password can both be set.
Restrict (not to be changed)
Restrict
Advertisement
