Advertisement
bizhub C4000i/C3300i
[2]
3. To reinstall, reverse the order of removal.
4.1.4 Exit cover
1. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Remove the left cover.
F.4.1.2 Left cover
[2]
6. To reinstall, reverse the order of removal.
4.1.5 Control panel unit
1. Remove the control panel cover.
F.4.1.6 Control panel cover
[1]
[1]
[1]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
2. Remove the screw [1], and remove the rear cover [2].
4. Remove the exit cover [1].
5. NOTE
▪ When mounting the exit cover, make sure that four tabs [1] are
hooked firmly.
▪ If the clearance [2] is wide, the tabs may not be hooked. Check the
state of the tabs.
F-6
Advertisement
