Advertisement
bizhub C4000i/C3300i
17. Follow the massage appearing on the screen and turn OFF and ON the main power switch.
<When activating with an USB memory>
This step is unnecessary. Proceed to the next step.
18. Select [Service Mode] -> [Billing Setting] -> [License Management] -> [Function List], and confirm that the activated function is displayed at
the list.
1.6.2 Deactivation
• To deactivate i-Option functions.
• To deactivate i-Option functions due to registration error, expiration of lease term, change to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appropriate deactivation code.
NOTE
▪ You need to access License Management System (LMS) to implement each function setting.
▪ Before accessing the LMS, CE are required to register the E-mail address and the password in the LMS. To register, click [CE
Initial Registration] that is located in the upper right of CE Login screen.
<Procedure>
1. Check the serial number of the target MFP.
2. Access the following URL using the PC connected to the Internet.
https://lms.konicaminolta.com/license/KM/support.aspx
3. Click [CE Login].
4. Enter [E-Mail Address] and [Password], and click [Login].
5. Click [Deactivate License Code].
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
J-8
SETTING
Advertisement
