Advertisement
bizhub C4000i/C3300i
Serial Number
Deactivation
Complete Code
14. Touch [Restart].
<When deactivating with an USB memory>
This step is unnecessary. Proceed to the next step.
15. Access to the LMS and login again.
For detail of the login method, refer to step 2 to step 4.
16. Click [Deactivate License Code in LMS].
17. Enter the serial number and the deactivation complete code confirmed at step13.
NOTE
▪ Make sure to enter alphabet letters of the serial number in all capital letters.
18. "Deactivation Complete" message will be displayed.
The license become invalid at both MFP and LMS, and deactivated token number can be used for another MFP.
1.6.3 Repair
• To repair license management information.
• To be used when license management information is lost due to replacement of CPU board or the storage board, or some other trouble.
• License management information can be repaired by acquiring repair code with repair request code, and entering the repair code.
NOTE
▪ You need to access License Management System (LMS) to implement each function setting.
▪ Before accessing the LMS, CE are required to register the E-mail address and the password in the LMS. To register, click [CE
Initial Registration] that is located in the upper right of CE Login screen.
▪ When the message "License management error occurred." is displayed, carry out the repair operation with the following steps.
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
0123456789012
01234-56789-01234-56789-01234-56789-01234
Restart
J-11
SETTING
Advertisement
