Advertisement
bizhub C4000i/C3300i
7. Using the "binary" command, set the File transfer mode to the binary transfer.
8. Using the "get" command, transfer the data for capture to PC.
9. Finish the command prompt.
NOTE
▪ After receiving capture data, select [Administrator] -> [Security] -> [Security Details] -> [Print Data Capture], and select [Restrict]
for the print data capture setting in order to delete the job data stored in the MFP storage.
▪ When Storage Format or Overwrite Temporary Data is performed, job data is deleted.
10.6 Image Stabilization Setting
• To change the type and timing of image stabilization.
• To provide the desirable image stabilization control that depends on customer's machine usage pattern, i.e. the ratio of color to black print.
Setting value
Standard
This mode is suitable for low-volume users and
reduces the number of times image stabilization is
carried out when the main power switch is turned
ON.
Color priority
This mode is suitable for high-volume and high ratio
of color print users.
Black priority
This mode is suitable for users who use mainly
black print and use less color print. It provides
monochrome stabilization and reduces the number
of times image stabilization is carried out when the
main power switch is turned ON.
Target user
Contents
If the change of absolute humidity is detected during
warm-up, normal stabilization is performed during
warm-up.
Color stabilization sequence is performed
unconditionally when the main power switch is turned
ON.
If the change of absolute humidity is detected during
warm-up, monochrome stabilization is performed
during the warm-up and color stabilization is performed
before color printing.
I-35
I SERVICE MODE > 10. System 2
Default setting
○
Advertisement
