Advertisement
bizhub C4000i/C3300i
6.6 Network
Key name
VLAN
VLAN ID
Settings
Settings
TCP/IP
TCP/IP Setting1 Wired Setting (*1)
Setting
TCP/IP Setting2 -
Filtering Type
IP Address
Filtering
Quick IP
Filtering
Packet Filtering Setting will be available when [Administrator] -> [Network] -> [TCP/IP Setting] -> [Filtering Type] is set to
IPsec
E-mail Setting
FTP Setting
SNMP Setting
SMB Setting
DPWS Settings
Bonjour Setting
WebDAV Settings
OpenAPI Setting
TCP Socket Setting
IEEE802.1X Authentication
Setting
LLTD Setting
-
Wireless Setting (*1)
-
Setting will be available when [Administrator] -> [Network] -> [TCP/IP Setting] -> [Filtering Type] is set to "IP
Address Filtering."
Setting will be available when [Administrator] -> [Network] -> [TCP/IP Setting] -> [Filtering Type] is set to
"Quick IP Filtering."
"Packet Filtering."
-
E-mail RX (POP)
E-mail TX (SMTP)
S/MIME Communication Settings It will not be displayed when [Service Mode] -> [Billing Setting] shows that
E-mail RX Print
FTP TX Setting
• It will not be displayed when [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is
mounted.
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON," enabling [SNMP v1/v2 Setting]
cancels enhanced security mode.
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON," setting [Security Level] to
"OFF" cancels enhanced security mode.
WINS/NetBIOS Settings
Client Settings
SMB Server Settings
SMB Browsing setting
-
-
WebDAV Client Settings
WebDAV Server Settings
Proxy Setting for Remote Access To configure the settings of the proxy server used when MFP accesses to
[Specified Application Start Setting] will be displayed when [Service Mode] -> [System 2] -> [Application
Change Setting] is set to "Permit."
-
IEEE802.1X Authentication
Setting
IEEE802.1x Settings
IEEE802.1x Authentication Trial
-
Function/Precondition
-
-
• It will not be displayed when [Service Mode] -> [Billing Setting] shows
that [Authentication Device2] is mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] shows
that [Authentication Device2] is mounted.
• When [SMTP Authentication] is set to "ON," enter the [User ID],
[Password], [Domain Name], [Authentication Setting], and [SMTP
Authentication Method].
[Authentication Device2] is mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] shows
that [Authentication Device2] is mounted.
• [E-Mail Body Print] displays only when Switch No. "152" is set to "01"
in HEX Assignment in [Service Mode] -> [System 2] -> [Software
Switch Setting].
-
It will not be displayed when [Service Mode] -> [Billing Setting] shows that
[Authentication Device2] is mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] shows
that [Authentication Device2] is mounted.
• Select "ON" for [DFS Setting] when using SMB transmission under an
environment that uses a distributed file system (DFS).
It will not be displayed when [Service Mode] -> [Billing Setting] shows that
[Authentication Device2] is mounted.
-
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to
"ON," setting [SSL Setting] to "SSL Only" cancels enhanced security
mode.
• Press [Initial Password] under [Access Rights Settings] to initialize the
password. (Default password: sysadm)
KM license server via WebDAV connection from [Administrator] ->
[License Settings] -> [Install License] (WebDAV connection) or [Service
Mode] -> [Billing Setting] to activate i-Option function.
IEEE802.1X authentication settings are made with Web Connection.
It will be displayed when [Administrator] -> [Network] -> [Network I/F
Configuration] is set to "Wireless Only."
-
H-14
H UTILITY MODE > 6. Administrator
Advertisement
