Advertisement
bizhub C4000i/C3300i
• The remote operations are disabled under the following conditions:
• Service mode operations are being performed on the machine.
• Remote operations are already performed from another PC.
Methods of the Remote panel
Operating method
Using the dedicated
software
Accessing the machine
directly
Server Settings
• To access this machine directly and control the control panel of the machine remotely, select [ON].
ON
OFF
<Procedure>
• If [ON] is selected, configure the following settings.
Setting item
Password Authentication
Select whether to request password entry for connecting with this machine. To request for a password entry, select
[Yes], and enter the password (using up to 64 characters).
IP Filtering (Permit
Select [Enable] to specify IP addresses allowed to access. Also enter the range of IP addresses allowed to access.
Access)
Port No.
To set the port number.
Connection Timeout
To set the time-out time.
NOTE
▪ Starting the remote operations
▪ Access the machine web server (URL: https://IP_address_of_MFP:Port_Number/panel/top.html) through the web browser.
▪ If Password Authentication is set, enter the set password.
▪ If IP Filtering is enabled, connection can be established only through the authorized address.
Client Settings
• To control the control panel of this machine remotely using the dedicated software, select [ON].
ON
OFF
<Procedure>
• If [ON] is selected, configure the following settings.
Setting item
Port No.
Connection Timeout
Server Address
Certificate Verification Level
Settings
Synchronize WebDAV Client
Setting
Launch Remote Panel from vCare To set whether or not to allow the remote panel to be started from the remote diagnosis system.
12.4.2 Network I/F Configuration
• It will be displayed when optional wireless LAN devices are mounted.
• To add a network interface to this machine, set a network interface configuration.
Setting item
Wired Only
• This method uses the dedicated software that collects screen information of the control panel of this machine
periodically, and operates the control panel from a computer on the network.
• You must prepare a dedicated remote control software program and server. Despite the burden, this method
enables you to control the machine remotely even from a computer located outside the router network.
• This method accesses this machine directly from another computer on the network, and operates the control
panel of the machine using a Web browser.
• A dedicated remote control software program is not required, but the computer used for the remote control
must be able to access this machine.
Setting item
Setting item
To set the port number.
To set the time-out time.
Enter the address of the server where the dedicated software was installed.
Expiration
Select whether to check that the server certificate is within the validity period.
Date
Key Usage Select whether to check that the server certificate is used according to the purpose approved
by the issuer.
Chain
Select whether to check that the server certificate chain (certification path) is correct.
Expiration
Select whether to check that the server certificate is within the validity period. The OCSP
Date
service and CRL (Certificate Revocation List) are checked in this order when the expiration
Confirmatio
date of the certificate is checked.
n
CN
Select whether to check that the CN of the server certificate matches the server address.
Synchronize WebDAV Client Setting: Select whether to use the proxy server for WebDAV transmission as
a proxy server for the server where the dedicated software was installed.
To use a different proxy server, select [Individual Settings] and enter the proxy server information.
Select this option to use this machine only in the wired LAN environment.
H UTILITY MODE > 12. Supplementary explanation of utility mode
Contents
Contents
Contents
Contents
H-29
Default setting
○
Default setting
○
Default setting
○
Advertisement
