Advertisement
bizhub C4000i/C3300i
12. List Output
12.1 Individual list print output
• Output the selected list data on the paper.
• You can select multiple lists. However, only items displayed on the same screen can be selected at a time.
• To be used at the end of setup or when a trouble occurs.
• The output time, day and date will also be printed.
List item
Machine Management List
Adjustments List
Parameter List
NOTICE
• When performing Machine Management List output, a detail code history list will be output. This [Detail code] is set to analyze the cause of
the C-FA14 error or the C-E301 error. The refer, to send inquiries to KM, also send the "detail code history list".
<Procedure>
1. Load the A4S/A4 or 8 1/2 x 11S/8 1/2 x 11 plain paper to a paper source.
2. Select the List item to be output.
3. Select [1-Sided] or [2-Sided].
4. Press the Start key, which will let the machine produce the list.
NOTE
▪ If no item is selected, the Start key has no response.
To produce an output of a list of setting values, adjustment values, total counter values, and others.
To produce an output of a list of Software Switch Setting.
To output the adjustment list for machine adjustment, process adjustment, etc. in Service Mode.
Output a nonvolatile parameter list.
I-45
I SERVICE MODE > 12. List Output
Contents
Advertisement
