Advertisement
bizhub C4000i/C3300i
Capturing individually procedure
1. Call the screen to be captured to the control panel.
2. Touch [Reset] on the control panel. This saves the screen in memory.
A "Capture" folder is automatically created and a file in the PNG format is saved in the folder.
[1]
[1]
[1] key
Continuous capturing procedure
1. Call the screen to be captured to the control panel.
2. Touch [Stop] on the control panel.
3. Start the screen operations.
4. When the operations are completed, touch [Stop] again.
5. A "Capture" folder is automatically created and a file in the PNG format is saved in the folder.
[1]
[1]
[2] key
[3]
In USB memory
3.7.2 Panel Operation Playback
• A series of operations is stored in memory and automatically played back on the control panel.
NOTE
▪ To perform the playback, be sure to go back to the first screen with which the capturing was started. A playback operation
starting with any screen not stored in memory results in faulty playback.
Preparations
1. Touch [Other].
2. Touch [Panel Operation Playback] and then [END].
Procedure
1. Call the auto playback starting screen to the control panel.
2. Touch [Stop] on the control panel.
3. Start the screen operations to store a series of screens.
4. When the operations are completed, touch [Stop] again.
5. Go back to the first screen and touch [Reset] on the control panel.
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 3. DEBUG
[2]
[2]
[3]
[2]
In USB memory
[2]
[3] key
-
-
J-32
SETTINGS
Advertisement
