Advertisement
bizhub C4000i/C3300i
Setting item
User Name
Set the user name used to access the FTP server.
Password
Set the password used to access the FTP server.
Port Number
Set the port number that is used to access the FTP server.
PASV
Set PASV mode to ON or OFF
Proxy
Set whether or not to connect to a proxy server.
WebDAV Setting
• To configure settings used in WebDAV transmission.
Setting item
Host Name
Set the host name of the WebDAV server.
File Path
Set the file path used in the WebDAV server communication.
User Name
Set the user name used to access the WebDAV server.
Password
Set the password that is used to access the WebDAV server.
Port Number
Set the port number that is used to access the WebDAV server.
Proxy
Set whether or not to connect to a proxy server.
SSL Settings
Select to use SSL communication.
3.3 Remote Log Retrieval
• Use the WebDAV server to retrieve remote access logs.
• Downloads the command set from the server configured from [Remote Log Server Settings] -> [Command Set Acquisition Pt.] at the timing
configured from [Time Setting] and [polling].
• If the command set successfully downloads, logs and settings data is retrieved in accordance with the command set, and the log files and
settings data files are saved on the server configured from [Remote Log Server Settings] -> [Log Save Destination].
Setting value
ON
OFF
Time Setting
• Downloads the command set at the specified time and retrieves/saves the logs and settings data.
• This item will be displayed only when [ON] is set to Remote Log settings.
Setting value
ON
OFF
• *: When [Yes] selected, configure the time settings.
Polling
• Downloads the command set at each specified time and retrieves/saves the logs and settings data.
• This item will be displayed only when [ON] is set to Remote Log settings.
Setting value
ON (*)
OFF
• *: When [ON] selected, configure the polling interval settings.
Retrieve Log Information
• Immediately downloads the command set and retrieves/saves the logs and settings data.
NOTE
▪ This is displayed only when [Administrator] -> [Security] -> [Security Details] -> [Export Debug Log] is set to "Allow."
3.4 Remote Log Server Settings
Command Set Acquisition Pt.
• Configures the server from which command sets as used for [Remote Log Retrieval] are retrieved.
• Touch [Copy Setting] after settings parameters are selected to copy the settings to the destination as configured from [Log Save
Destination].
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 3. DEBUG
Contents
Contents
J-30
Setting value
64 characters maximum
64 characters maximum
1 - 65535
ON
OFF
ON
OFF
Setting value
Alphanumeric characters
and symbols up to 253
characters
142 characters maximum
64 characters maximum
64 characters maximum
1 - 65535
ON
OFF
ON
OFF
Default setting
○
Default setting
○
Default setting
○
SETTINGS
Default
setting
-
-
21
○
○
Default
setting
-
-
-
-
80
○
○
Advertisement
