Advertisement
bizhub C4000i/C3300i
IC Card Type
Operation Settings
Authentication Card
ID Number
Bio
Beep Sound
Authentication
Operation Settings
• *: Vendor ID and Product ID are identification information to specify USB devices.
<Procedure>
• Select either one of the authentication devices and press the corresponding key to go to the individual operation setting screen.
• The screen displays the authentication device that is selected in [Service Mode] -> [Billing Setting] -> [Authentication Device 2].
• When using SSFC (Shared Security Formats Cooperation) for IC card authentication, acquire the following information from the
administrator and convert the value to input using the control panel.
Items
Room number
Floor number
Building number
Area number
Security level
Company identification code
(CL code) (*1)
Company code (*2)
*1: The character length of the company code is 10 bytes.
*2: Use alphabetical upper case/lower case characters and numeric characters for Company code. When the company code is not set, this
space will be left blank.
Logoff Settings
• Select whether or not the user is logged off after a scan or fax is sent or after the copy document is scanned.
Do not log off
Log off
12.4 Network
12.4.1 Remote Panel Settings
Outline
• This is not displayed when [Service Mode] -> [Enhanced Security] -> [CE Authentication] is set to "OFF."
• Issue and install the self-signed certificate from Device Certificate Setting under Security Setting of Web Connection.
• Enable CE Password.
• The control panel of this machine can be operated remotely from a computer on the network.
• During remote operations, display on the control panel can be masked to thereby lock the operation on the machine side (the machine
control panel is forced into the locked state when the machine is set into the service mode through remote operation).
• The control panel can also be unlocked through remote operation. The machine control panel is enabled when unlocked remotely.
• Operations performed through the machine control panel while it is in the unlocked state can be reflected in the remote panel side.
• To use the FeliCa and Type A cards together, select [FeliCa+TypeA], [SSFC+TypeA], [FCF+Type
A], [FCF(Campus)+Type A], or [FeliCa(Proprietary Card)+Type A]. When [SSFC+TypeA] is
selected, detailed information such as the company code or company identification code is
registered.
• To use NFC, select [NFC(HCE)].
• To use the Type A card with NFC, select [TypeA+NFC(HCE)].
• To use the FeliCa card with NFC, select [FeliCa+NFC(HCE)], [SSFC+NFC(HCE)], [FCF
+NFC(HCE)], [FCF(Campus)+NFC(HCE)], or [FeliCa(Proprietary Card)+NFC(HCE)]. When [SSFC
+NFC(HCE)] is selected, detailed information such as the company code or company identification
code is registered.
Card Detail Settings
The type of the IC card which has been set will be displayed.
• This is displayed when the loadable driver used for the YSoft card reader has been installed.
Set how to log in to this machine.
• "Card Authentication": Pass the IC card or NFC-compatible Android device over the authentication
unit to log in.
• "Card Authentication + Password": Pass the IC card or NFC-compatible Android device over the
authentication unit, and enter the password to log in.
• "Card Authentication" is specified by default.
• Specify whether to notify the counter, which collects the use status of this machine, of the
authentication card ID.
• "Ignore" is specified by default.
• Set whether to give a "blip" sound when the finger vein pattern is scanned successfully.
• "ON" is specified by default.
Set how to log in to this machine.
• "1-to-many authentication": A user simply needs to place his or her finger to log in.
• "1-to-1 authentication": A user needs to enter the user name and place his or her finger to log in.
• "1-to-many authentication" is specified by default.
Information to be obtained from the administrator
Sample-data (decimal number)
06BGLQVX17
(ASCII code)
CompanyA
(ASCII code)
Setting item
H UTILITY MODE > 12. Supplementary explanation of utility mode
The settings information of for the registered IC card loadable driver can be
changed via the Web browser on the machine. This does not display if any of the
following conditions are satisfied.
• A driver other than the AU-201S loadable driver is installed.
37
15
50
85
2
H-28
Setting value (hexadecimal number)
00 25
00 0F
00 32
00 55
00 02
30 36 42 47 4C 51 56 58 31 37
CompanyA
Default setting
○
Advertisement
