Table of Contents
Advertisement
RS-232 Terminal Interface
The keys used when operating via the terminal are as follows:
To select options.
[Enter]
To go to a submenu or to execute a selected option.
[Esc]
To escape and go back to the previous menu.
[Ctrl] [L]
The controller will refresh the screen information.
If the RS-232 cable is connected while the controller
is powered on, press [Ctrl] [L] to refresh the screen
information.
The initial screen appears when the controller is powered-on. Use
arrow keys to select the desired terminal emulation mode, then press
[ENTER] to enter the Main Menu.
Type Q or use the
[Enter]. Choose Yes to create a logical drive.
Chapter 5 Quick Setup
keys to select "Quick installation", then press
69
Advertisement
Table of Contents
