Maximum Queued I/O Count
Press t or s to select "Maximum
Queued I/O Count", then press ENT. The
current setting will be displayed on the
LCD.
Press t or s to select an I/O count from
1 to 1024 or Auto, then press ENT for two
seconds.
Every time you change this setting, you must reset
the controller for the changes to take effect.
LUNs per Host SCSI ID
Press t or s to select "LUNs per Host
SCSI ID", then press ENT. The current
setting will be displayed on the LCD.
Press t or s to select a number from 1,
2, 4 and 8, then press ENT for two
seconds.
Every time you change this setting, you must reset
the controller for the changes to take effect.
Drive-side SCSI Parameters
Press t or s to select "Drive-side SCSI
Parameters", then press ENT.
114
Maximum Queued
I/O Count- 256..
Maximum Queued
I/O Count-Auto ?
LUNs per Host
SCSI ID - 8
..
LUNs per Host
SCSI ID - 4
?
Drive-side SCSI
Parameters
..
User's Guide