Viewing and Editing SCSI Channels
Viewing and Redefining a Channel Mode
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit SCSI Channels", then press
ENT.
SCSI
Channel
information
displayed on the LCD. Press t or s to
browse through the information of every
SCSI channels. Press ENT on the
channel you wish the channel mode
changed.
Press t or s to select "Redefine
Channel Mode", then press ENT.
Press ENT for two seconds to change
the channel mode.
The new channel's setting will be
displayed on the LCD .
Every time you change a channel's mode, you must
reset the controller for the changes to take effect.
100
View and Edit
SCSI Channels
will
be
CH0=Host
SID=NA SXF=20.0M
Redefine Channel
Mode
Redefine? CHL=0
To=Drive Channel
CH0=Drive PID=7
SID=NA SXF=20.8M
User's Guide
×
PID=0
..