Table of Contents
Advertisement
Every time you change the Cache Parameters,
you must reset the controller for the changes to
take effect.
When using the Redundant Controller function,
the cache will automatically switch to Write-
through mode eventhough it shows write back.
Optimization for Sequential / Optimization for Random
Press t or s to select "Caching
Parameters", then press ENT.
Press t or s to select "Optimization I/O",
then press ENT. The current setting
(Random or Sequential) will be displayed
on the LCD.
Press ENT for two seconds to change the
current setting.
Every time you change this setting, you must reset
the controller for the changes to take effect.
Host-side SCSI Parameters
Press t or s to select "Host-side SCSI
Parameters", then press ENT.
Chapter 7 General Front Panel Operation
Caching
Parameters
..
Optimization I/O
Random
..
Optimization for
Sequential I/O ?
Host-side SCSI
Parameters
..
113
Advertisement
Table of Contents
