Table of Contents
Advertisement
Enter the Agent name or the IP address and the Community name of
the host computer in the first column.
Click on the select button in front of "RS-232 Interface" to select.
Choose the COM port of the host computer connected to the AA-
3102RS RAID controller, and choose the baud rate speed of the RAID
controller. Press "OK" to establish the connection. After the connection
has been established, all operations will act exactly the same as
executing the Acer RAID Manager from the host computer. The Fault-
bus error signals and drive failure signals will also pass through the
SNMP.
The baud rate of both the RAID controller and Acer
RAID Manager
establish the connection.
Chapter 11 Redundant Host, Multiple Host
must be the same in order to
205
Advertisement
Table of Contents
