Test Drive Failure Led For Each Drive Canister - Acer AcerAltos 3102RS User Manual

Press t or s to select "Set Peripheral
Devices Entry", then press ENT.
Press t or s to select the desired item:
Power Supply, Cooling Fan, Temperature
Alert or UPS Power Fail, then press ENT
to choose.
Press t or s to select an alternative
selection. Press ENT for two seconds to
confirm.

Test Drive Failure LED for Each Drive Canister

Choose "View and Edit SCSI Drives" to
enter the Main Menu. The SCSI drive
information will be displayed on the LCD.
Press t or s to select the desired SCSI
drive or empty drive entry, then press
ENT.
Press t or s to select "Toggle Failure
Signal", then press ENT.
Press ENT for two seconds to toggle the
drive failure signal.
The drive failure LED should light on or
off, following the toggle.
242
Set Peripheral
Devices Entry ..
Power Supply
Status Disabled
Enable Power Supply
Status ?
C=1 I=0 1010MB
LG=0 LN SEAGATE
Toggle Failure
Signal ..
Toggle Failure
Signal ?
User's Guide