Assign a Slot Number to an Empty Canister
When there is an empty drive canister which currently does not
contain any drive, the corresponding SCSI channel/ID will not appear
in the drive information list. Assign a slot number to this empty canister
and add a drive entry in order to use it later when a drive is installed.
Add Drive Entry
Choose a SCSI drive, then press [Enter]. Choose "Add Drive Entry" in
the menu, then press [Enter]. Choose the corresponding SCSI
channel/ID for this empty canister, then press [Enter]. An empty drive
entry "ABSENT" will appear in the drive information list.
Chapter 12 Fault-Bus
245