Table of Contents
Advertisement
Enable Terminal Emulation
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Config Parm", then press ENT.
Select "Communication Parameters ..",
then press ENT.
Select "RS-232 Configuration ..", then
press ENT.
Select "COM1 Configuration ..", then
press ENT. (Select COM2 if you are
using COM2)
Select "Term Emul Disab", then press
ENT. If it is already enabled, "Term Emul
Enab" will appear. There is no need to
change the setting if it's already enabled.
Press t or s to select "Change to
Enab", then press ENT for 2 seconds to
set.
Setting PPP ID, PPP Password
To establish connection between AA-3102RS and the host computer
through PPP, it is necessary to enter a PPP Name and PPP Password
for logon identification. Set the PPP Name and PPP Password. They
will be stored in the controller and will be used for PPP connection
later on.
208
View and Edit
Config Parms ×.
Communication
Parameters
..
RS-232
Configuration ..
COM1
Configuration ..
Term Emul Disab
..
Term Emul Disab
Change to Enab ?
User's Guide
Advertisement
Table of Contents
