You can assign a Local Spare Drive by choosing "Assign Spare
Drives" in the above screen. A list of available drives will be displayed
on the screen. Mark an asterisk (*) on the drive(s) that will be assigned
by moving the cursor bar to that device, then pressing [Enter]. Press
[ESC] when done.
To exit this menu, press [ESC].
A prompt to confirm the changes will appear. Select Yes to create the
logical drive, or No to cancel.
When a fault-tolerant RAID level (1, 3 or 5) has been selected, the
controller will start initializing parity. A progress indicator will be
displayed on the screen. After initialization is done, the created logical
drive is also complete.
138
User's Guide