Table of Contents
Advertisement
Upgrading the Firmware Binary Only
1. From the Main Menu, scroll down to "System Functions."
2. Go to "Controller Maintenance."
3. Choose "Download Firmware."
4. Set ZMODEM as the file transfer protocol of your terminal
emulation software.
5. Send the Firmware Binary to the controller. In HyperTerminal,
select "Send file." If you are not using HyperTerminal, choose
"Upload" or "Send" (depending on the software).
6. When the Firmware completes downloading, the controller will
automatically reset itself.
C-6
User's Guide
Advertisement
Table of Contents
