How Do You Configure the Acer RAID Manager to Use
In-band SCSI?
RAID Controller Adjustments
Don't disconnect your RS-232C cable yet! It is required for another 10
minutes or so.
Some adjustments must be made to the RAID
controller and to the host computer's SNMP settings before the two
can communicate using SCSI commands. (Note: The SNMP settings
must be changed prior to installation of the Acer RAID Manager . See
SNMP Settings below for a detailed explanation.) The RAID controller
settings can be changed using the Front Panel. (Your front panel may
be different in appearance from the one shown in this example.)
ATTEN BUSY
From the Main Menu, press t or s to select "View and Edit
Configuration Parameters. "
Press <Enter>; and then use the t or s to select "Host-side SCSI
Parameters." Then press <Enter>.
56
Controller v2.11
Ready
POWER
ENT
ESC
View and Edit
Config Parms
Host-side SCSI
Parameters
..
User's Guide