Table of Contents
Advertisement
To set the maximum synchronous clock
of this SCSI target, choose "Max.
Synchronous Xfer Clock", then press
ENT. The current clock setting will be
displayed on the LCD.
Press t or s to change the clock, then
press ENT for two seconds. Refer to
Appendix D, Sync. Clock Period and
Sync.
Clock
Frequency,
information.
Maximum Transfer Width
Press t or s to select a SCSI target,
then press ENT.
To set the maximum transfer width of
this SCSI target, choose "Max. Xfer
Narrow Only" or "Max. Xfer Wide
Supported", then press ENT. The current
clock setting will be displayed on the
LCD.
Press ENT for two seconds to change
the setting.
Parity Check
Press t or s to select a SCSI target,
then press ENT.
Choose "Parity Check", then press ENT.
The
current
clock
setting
displayed on the LCD.
Chapter 7 General Front Panel Operation
Max Synchronous
Xfer Clock# 12..
Period 4ns units
Def= 12
for
more
SCSI Target
CHL=1 ID=0
Max Xfer Wide
Supported
Max Xfer Narrow
Only
SCSI Target
CHL=1 ID=0
Parity Check
will
be
Enabled
?
..
..
?
..
..
109
Advertisement
Table of Contents
