Table of Contents
Advertisement
Using In-band SCSI in Acer RAID Manager
Local Connection — SNMP Not Required
If you are using the Acer RAID Manager on the host computer that is
using In-band SCSI -- i.e., 'local access' -- SNMP service is not
required. You may now connect by going to FILE>CONNECT and
selecting the port address.
Remote Connection — SNMP Required
SNMP Service is required to administrate a RAID controller installed in
a remote computer. This passage describes how to establish a
connection from the Acer RAID Manager to a RAID controller that is
connected to a remote host via In-band SCSI. For information
regarding other operations and of the Acer RAID Manager , please
refer to the Acer RAID Manager User Guide.
60
User's Guide
Advertisement
Table of Contents
