Table of Contents
Advertisement
Checklist for Agent Site
1. The host computer is connected to the RAID controller via the host
SCSI cable (the cable which is used to transfer data between the
host computer and the RAID — there's no need for an extra SCSI
cable.)
2. The host computer's operating system has SNMP service
installed.
3. The host computer has the In-band SCSI SNMP agent installed
for the corresponding operating system. (The example described
herein is Windows NT.)
4. The host computer is up and running.
This following applies to Windows NT 4.0 with Service
Pack 3: if the "SNMP Service" is installed after the
Service Pack 3 has been installed, Service Pack 3 must
be re-installed in order for the SNMP service to work
properly.
Checklist for Manager Site
1. The system is running Windows NT (Workstation or Server) and
has SNMP Service installed.
2. The Infortrend Acer RAID Manager was installed with the "SNMP
Manager Site" option selected.
3. The Acer RAID Manager is running.
This following applies to Windows NT 4.0 with
Service Pack 3: if the "SNMP Service" is installed
after the Service Pack 3 has been installed, Service
Pack 3 must be re-installed in order for the SNMP
service to work properly.
62
User's Guide
Advertisement
Table of Contents
