Table of Contents
Advertisement
Upgrading firmware using In-band SCSI + Acer RAID
Manager
The In-band SCSI connection and the ability to upgrade the firmware
via In-band SCSI are supported in Acer RAID Manager , version 1.61A
and later versions. This version of the Acer RAID Manager is for use
with the firmware 2.11. If the firmware currently in the controller is
earlier than 2.11, In-band SCSI is not supported.
Establish the In-band SCSI connection in Acer RAID Manager
Please refer to Chapter 4 section "Using In-band SCSI in Acer RAID
Manager" for details on establishing the In-band SCSI connection in
Acer RAID Manager.
Upgrade Both Boot Record and Firmware Binaries
C-2
User's Guide
Advertisement
Table of Contents
