Table of Contents
Advertisement
Data Routing Through PPP, Data Routing Direct to Port
There are two options in this column, "Comm Route PPP" (Data
Routing Through PPP) and "Comm Route Dir" (Data Routing Direct to
Port). Set it to "Comm Route PPP" (Data Route Through PPP) in order
to let the terminal emulation data pass through PPP, then to the client
computer.
If the COM port is not used for PPP connection, set
it as "Comm Route Dir" (Data Routing Direct to Port)
to keep the terminal emulation working properly.
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Config Parm", then press ENT.
Select "Communication Parameters ..",
then press ENT.
Select "RS-232 Configuration ..", then
press ENT.
Select "COM1 Configuration ..", then
press ENT. (Select COM2 if you are
using COM2)
Select "Comm Route Dir", then press
ENT.
210
View and Edit
Config Parms ×.
Communication
Parameters
..
RS-232
Configuration ..
COM1
Configuration ..
Comm Route Dir
..
User's Guide
Advertisement
Table of Contents
