Table of Contents
Advertisement
Choose the logical drive you wish to assign a logical drive name, then
press [Enter]. Choose "logical drive name", then press [Enter] again.
The current logical drive name will be displayed on the screen. You
may now enter the new logical drive name in this field. Enter the logical
drive name, then press [Enter] to save the new name.
Rebuilding Logical Drive
Choose the logical drive that has a failed member drive, then press
[Enter]. Choose "Rebuild logical drive", then press [Enter]. When
prompted with "Rebuild Logical Drive?", select Yes.
Chapter 8 RS-232C Terminal Interface
143
Advertisement
Table of Contents
