Table of Contents
Advertisement
The Dial-out command is the only command that will be sent to the
modem when dialing-out. If it's dialing to a pager, the pager number
and message (if applicable) have to be composed in this column. If it's
dialing to a remote terminal, the phone number of the remote modem
has to be entered in this column. Refer to your modem's manual for
the AT command set.
Auto Dial-out on Initialization
Select "Auto Dial-out on Init .." in the
Dial-out Functions menu, then press
ENT.
Press ENT for two seconds to set.
Dial-out Timeout
Select "Dial-out Timeout .." in the Dial-out
Functions menu, then press ENT.
Enter the Dial-out Timeout period in this
column. Press t or s to change the
current character, press ENT to move
the cursor to the next space. Press ENT
for two seconds when finished.
When the modem is dialing out, the controller will start to count the
dial-out timeout period. If the connection cannot be established within
the dial-out timeout period, the controller will send a 'hang-up'
command to the modem to hang up the phone.
230
Auto Dial-out
on Init Disabled
Enable Auto
DialOut on Init?
Dial-out Timeout
None
..
Dial-out Timeout
Û seconds
?
User's Guide
Advertisement
Table of Contents
