Table of Contents
Advertisement
Press ENT for two seconds to change
the setting.
Disconnecting Support
Press t or s to select a SCSI target,
then press ENT.
Choose "Disconnect Support", then press
ENT. The current clock setting will be
displayed on the LCD.
Press ENT for two seconds to change
the setting.
Maximum Tag Count
Press t or s to select a SCSI target,
then press ENT.
Choose "Max Tag Count", then press
ENT. The current clock setting will be
displayed on the LCD.
Press t or s to change the setting, then
press ENT for two seconds to change the
setting.
Disabling the Maximum Tag Count will disable the
internal cache of this SCSI drive.
110
Disable
Parity Checking?
SCSI Target
CHL=1 ID=0
..
Disconnect
Support Enabled
Disable Support
Disconnect
?
SCSI Target
CHL=1 ID=0
..
Max Tag Count:
Default( 32)
..
Tag Cur=32
Set to:Default ?
User's Guide
Advertisement
Table of Contents
