Table of Contents
Advertisement
Setting the Transfer Speed
Transfer speed refers to the SCSI bus speed in Synchronous mode.
Asynchronous mode is also available in this option setting. In
Ultra/Ultra Wide SCSI, the maximum Synchronous speed is 20.8Mhz.
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit SCSI Channels", then press
ENT.
SCSI
channel
information
displayed on the LCD. Press t or s to
browse through the information of every
SCSI channel. Press ENT on the channel
you wish the transfer speed changed.
Press t or s to select "Set Transfer
Speed", then press ENT.
The current speed of this SCSI channel
will be displayed on the LCD. Press t or
s to select the desired speed, then press
ENT for two seconds.
Every time you change the Transfer Speed, you must
reset the controller for the changes to take effect.
106
View and Edit
SCSI Channels
will
be
CH0=Host
SID=NA SXF=20.0M
Set Transfer
Speed
CHL=0 Clk=20.0M
Change to=20.0M?
User's Guide
×
PID=0
..
Advertisement
Table of Contents
