Table of Contents
Advertisement
When "Verification on Normal Drive Writes" is
enabled, all read/write will be slower than when it is
disabled.
Controller Parameters
Controller Name
Press t or s to select "Controller
Parameters", then press ENT.
The current Controller Name will be
displayed on the LCD. Press ENT to
enter a new controller name.
To enter the controller name, press t or
s to select a character, then press ENT
to move to the next character. After
entering all the character, press ENT for
two seconds.
Chapter 7 General Front Panel Operation
Controller
Parameters
..
Controller Name:
Not Set
Enter Ctlr Name:
z
121
Advertisement
Table of Contents
