Table of Contents
Advertisement
Disk Array Parameters
Rebuild Priority
Rebuilding time will depend on the capacity of the logical drive. The
AA-3102RS RAID controller provides background rebuilding ability.
Meaning, the controller is able to serve other I/O requests while
rebuilding the logical drives.
transparent to the host computer or the operating system.
The background rebuild process has four priority options:
Low
Normal
Improved
High
The default priority is "Low" which uses the controller's minimum
resources to rebuild. Choosing "Normal" or "Improved" will speedup
the rebuilding process and choosing "High" will use the controller's
maximum resources to complete the rebuilding process at the shortest
time.
Rebuild priority can be configured through the RS-232C Terminal
Interface, Acer RAID Manager or the front panel.
Verify-after-Write
The controller has the ability to force the hard drives to verify after data
has been written to the media of the HDD. There are three selectable
methods:
Verification on LD Initialization Writes
Performs Verify-after-Write while initializing the logical drive.
Chapter 3 Functional Descriptions
The rebuilding process is totally
21
Advertisement
Table of Contents
