Table of Contents
Advertisement
Chapter 5 Quick Setup
A "Logical Drive" is a set of drives grouped together
to operate under a given RAID level and appears as
a single contiguous drive. The AA-3102RS controller
is capable of grouping connected drives to as many
as 8 logical drives, each configured on the same or
different RAID levels. A logical drive can be further
divided into a maximum of 8 "Partitions". During
operation, the host sees an unpartitioned logical drive
or a partition of a partitioned logical drive as one
single physical drive.
Front Panel
The AA-3102RS controller's default configurations are based on the
number and location of the drives installed. If this is your first time to
install, we suggest that you try the default configurations provided by
the "Quick Installation" function. This will allow you to immediately
verify whether the system is working. Further optimization can then be
made later on.
Quick Setup assumes there is only one host channel.
Press ENT for 2 seconds to enter the Main menu. Select "Quick
Logical Drive Install ..", then press ENT.
Quick Logical
Drive Install ..
Chapter 5 Quick Setup
67
Advertisement
Table of Contents
