Acer AcerAltos 3102RS User Manual page 77

Use the t or s to select Support for Removable Media. The default
setting is "Disabled." If the LCD reads "Enabled," press <Enter> and
you will be prompted to accept a change. If the screen reads
"Disabled," press <Esc> to return to the Host-side SCSI submenu's.
Press t or s to select "LUN Application"; and then press <Enter>.
The default setting is "All Undefined LUN."
Press <Enter> and use t or s to select "Undefined LUN-0's."
Press <Enter> to accept. The screen should display the following
message.
The RAID controller adjustments necessary to use In-band SCSI have
been completed. For locally accessing the host computer (see section
Local Connection — SNMP Not Required), all steps have been
completed. For remotely accessing the host computer, further
adjustments must be made (see section Remote Connection —
SNMP Required).
Chapter 4 Hardware Installation
SupportRemovable
Media - Disabled
LUN Application-
All Undefine LUN
Applies to ?
Undefine LUN-0's
LUN Application-
Undefine LUN-0's
59