Table of Contents
Advertisement
Move the cursor bar to the drive you wish to identify, then press
[Enter]. Choose "Identify SCSI drive", then choose "flash all drives" to
flash the read/write LEDs of all the drives in the drive channel. Choose
Yes.
Or choose "flash selected drive" to flash the read/write LED of the
selected drive only. Choose Yes.
Deleting a Spare Drive (Global / Local Spare Drive)
Move the cursor to a Local Spare Drive or Global Spare Drive, then
press [Enter]. Choose "Delete Global/Local Spare Drive", then press
[Enter] again. Choose Yes.
154
User's Guide
Advertisement
Table of Contents
