Choose the desired SCSI drive or empty drive entry from the drive
information list, and press [Enter]. Choose "Toggle Failure Signal" in
the menu, then press [Enter] to toggle the drive failure signal. The
drive failure LED should light on or off followed with the toggle.
Viewing the Status of Each Fault-bus Error Signal Input
Choose "View and Edit Peripheral Devices" in the Main Menu and
press [Enter]. Select "View Peripheral Device Status" in the menu and
press [Enter].
The current status of each enabled Fault-bus error signal input is
listed. Try to emulate the errors and view the status of each item as
described
above.
250
User's Guide