Table of Contents
Advertisement
Press t or s to choose "Slot Number
Assignments", then press ENT.
If currently there is a slot number
assigned to this SCSI drive, the current
slot number will be displayed. Press t or
s to select the desired slot number, then
press ENT.
The slot number has two characters. The
right character will be chosen first, then
the left character. Press ENT once to
switch
between
the
character. Press ENT for two seconds.
Assign a Slot Number to an Empty Canister
When there is an empty drive canister which currently does not
contain any drive, its SCSI channel/ID will not appear in the drive
information list. Assign a slot number to this empty canister and add a
drive entry in order to use it later when a drive is installed.
Add Drive Entry
Choose "View and Edit SCSI Drives" to
enter the Main Menu. The SCSI drive
information will be displayed on the LCD.
Press t or s to select a SCSI drive,
then press ENT.
Press t or s
to select "Add Drive
Entry", then press ENT.
Chapter 12 Fault-Bus
Slot Number
Assignments ..
Slot Def # 1
Change to # Û ?
Slot Assignment
Set to
left
and
right
C=1 I=0 1010MB
LG=0 LN SEAGATE
Add Drive Entry
# 0 ?
..
239
Advertisement
Table of Contents
