Table of Contents
Advertisement
The basic read/write unit of a hard drive is Block. If
the drive members in one logical drive have different
block numbers (capacity), the minimum block number
among all the member drives will be chosen as the
maximum block number of the RAID configuration.
Viewing Logical Drives and Drive Members
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Logical Drives..", then press
ENT.
Press t or s to select the logical drive,
then press ENT.
Press t or s to select "View SCSI
Drives..", then press ENT .
Press t or s to scroll through the drives.
Deleting a Logical Drive
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Logical Drives", then press ENT.
Press t or s to select a logical drive,
then press ENT.
84
View and Edit
Logical Drives ×
LG0 RAID5 DRV=3
2012MB GD SB=1
View SCSI Drives
..
C=1 I=0
1010MB
LG=0 LN SEAGATE
View and Edit
Logical Drives ×
LG0 RAID5 DRV=3
2012MB GD SB=1
User's Guide
Advertisement
Table of Contents
