Replacing The Guide Roller Assembly - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
4-7. Replacing the Guide Roller Assembly
n
In the unit of the following serial numbers, when using the tools for the first time
combining the reference base assembly (J-6515-150-A) and 35GR height gauge (J-
6515-090-A), be sure to perform the height adjustments for all following guide
rollers and reel tables at the same time.
For S/T reel table height, S/T tension regulator height, GR1 through GR3 and GR8
through GR10.
After performing the height adjustments using these tools, perform the height
adjustment for only the replaced roller guide and the roller guide considered that
there is fault.
Applicable Serial numbers: 10002, 10003, 10302 through 10304, 10401 through
10405, 10502 and 10503
Tools
. Torque wrench (For 60 kgf.cm)
. Torque driver bit (For M5)
. L-shaped hexagonal wrench (Across flat: 3 mm, for M3)
. Reference base assembly:
. 35GR reference base assembly: (J-6515-080-A)
. 35GR height gauge:
. 35G height gauge:
FVS-1000 MMP1
(J-6515-150-A)
(J-6515-090-A)
(J-6515-050-A)
4-7. Replacing the Guide Roller Assembly
4-19
Advertisement
Table of Contents
