1-1. Overview
The FVS-1000 is the system to convert the video data recorded on the 35 mm or 16 mm film to the SDTV
or HDTV signal and to convert the audio data to the audio signals.
The FVS-1000 consists of the film transport system, processor system, imager movement table and lamp
house and is mounted in the rack of which the dimensions is 1173 mm (width) x 1798 mm (height) x 780
mm (depth). The film transport system is the FVS-T1000. The processor system is the FVS-P1000
which consists of the processor boards.
1-2. Unpacking and Supplied Accessories
. Unpack carefully according to the procedure on the side of the pack.
. The FVS-T1000 is equipped with the casters, so it is easy to move.
Supplied accessaries
FVS-T1000
Description
Operation manual
Maintenance manual part 1
Knob for spool
Control panel
Control panel assembly
Rack angle
Screw (B5 x 10)
Screw (PSW4 x 10)
Lens
35 mm conversion lens
Master zoom lens
OPS mirror
OPS assembly
Screw (PSW3 x 6)
Air blow assembly
Air blow assembly
Connecting elbow assembly
Coupler
Drain assembly
Processor
Handle
Screw (RK5 x 14)
Non-vib. mount assembly
Screw (C6 x 10)
FVS-1000 MMP1
Section 1
Installation
Amount
Description
x 1
Rear shield (for UC/CE model only)
Screw (PSW3 x 6)
x 1
Duct cover
x 2
Screw (B4 x 6)
16 mm lens kit
x 1
16 mm single focus lens
x 2
Gate base (16) assembly
x 4
Retainer (16) assembly
x 4
16S Pad assembly
16T Pad assembly
Core retainer (16) assembly
x 1
x 1
Extension board (EX-512)
x 1
FVS-P1000
x 4
Description
x 1
Extension board (EX-632)
x 1
x 1
Extension board (EX-670)
x 1
x 2
x 4
1 set
x 8
Amount
x 1
x 11
x 1
x 5
x 1
x 1
x 1
x 1
x 1
x 2
x 1
Amount
x 1
x 1
1-1