Replacing The Processor Assembly - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
4-10. Replacing the Processor Assembly
Preliminary Preparations
Open the door at the bottom of the unit.
Removal
1. Removing the cables
(1) Disconnect the cables from the clip plate
(coaxial cable and flat cable).
n
If the cables is bound to the handle of the
processor assembly, unbind it also.
(2) Remove the two screws, and remove the clip
plate.
(3) Loosen the four screws (with stopper), and
remove the front cover.
(4) Disconnect the flat cable from the connector
CN6027 of the MY-89 board.
(5) Remove the three coaxial cables from the
connectors CN402, CN702, and CN102 of
the ADC-36 board.
FVS-1000 MMP1
Screws (with stopper)
Front cover
Screw
(with stopper)
PSW3 x 6
Clip plate
Top view
Harness band
Notch
Clip plate
4-10. Replacing the Processor Assembly
ADC-36 board
MY-89 board
Flat cable
Coaxial cables
Screw (with stopper)
Cables
Handle
CN402
CN702
CN6027
CN102
4-25
Advertisement
Table of Contents
