Test Mode For The Video System Check; Frame Rate Setting - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
5-2. Test Mode for the Video System Check
By changing the board setting mounted in this unit, the frame rate setting and the test signal output are
enabled irrelevant to the menu set from the control panel.
And the system connection and operation check of the board are also enabled.
5-2-1. Frame Rate Setting
By setting the Bit-1 of DIP switch S2001 of the SY-256 board to ON, the frame rate can be set irrelevant
to the menu setting.
Perform the frame rate setting in the settings of Bit-2, 3, 4, 5, 7, and 8 of DIP switch S2001 of the SY-256
board.
DIP switch S2001/SY-256 board
Bit
Name
1
Mode setting
2
Frequency selection
3, 4
External REF selection
5
External REF selection
7, 8
Film frame rate
FVS-1000 MMP1
Setting
Function
ON
Local setting
ON
1000/1001
OFF
1000/1000
Bit-3
Bit-4
OFF
OFF
24FPS
ON
OFF
25FPS
OFF
ON
30FPS
ON
Set SD as REF
OFF
Set HD as REF
Bit-7
Bit-8
OFF
OFF
24FPS
ON
OFF
25FPS
OFF
ON
30FPS
5-2. Test Mode for the Video System Check
5-5
Advertisement
Table of Contents
