Sony FVS-1000 System Maintenance Manual page 28
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
1-10. Installation Procedure
(4) Remove the two screws, then remove the connector cover from the rear panel.
(5) Pass the connector of the air blow assembly through the hole of the connector cover, then connect it
with the connector fixed to the connector support plate.
(6) Fix the connector cover to the rear panel with the two screws (B3 x 6).
n
Put the harness inside as much as possible.
Air blow assembly
(7) Insert the tube (ø8) to the elbow (one-touch joint) of the air blow assembly.
n
Insert the tube completely, then confirm that it does not come out by pulling slightly.
(8) Insert the connecting elbow to the bulkhead union.
n
Insert the connecting elbow completely, then confirm that it does not come out by pulling slightly.
Air blow assembly
1-16
Connector
Bulkhead union
Elbow
B3 x 6
Connector cover
Connecting elbow
assembly
Tube (ø8)
FVS-1000 MMP1
Advertisement
Table of Contents
