Using The Extension Board - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
2-9. Using the Extension Board
2-9. Using the Extension Board
The extension board is provided with the FVS-P1000 for checking and adjusting the processor board.
. Extension board (EX-632): A-8320-763-A
. Extension board (EX-670): A-8320-764-A
Extending the Front Side Board
1. Open the door at the bottom of the unit.
2. Loosen the four screws, and remove the front cover. (Refer to Section 2-8-1.)
3. Open the eject levers at both ends of the board removed in the arrow direction.
4. Holding the eject levers, pull out the board.
Eject lever
5. Set the dip switches of the extension board according to the board extended.
6. Push in the extension board (EX-632) according to the guide rail.
7. Insert the board removed into the extension board.
Processor board
2-36
For extending the board in front of the processor
For extending the board at the rear of the processor
Eject lever
Dip switches
Extension board
(EX-632)
Board
FVS-1000 MMP1
Advertisement
Table of Contents
