Replacing The Guide Plate Assembly - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
4-8. Replacing the Guide Plate Assembly
Tools
. Phillips screwdriver
. Torque wrench (For 60 kgf.cm)
. Torque driver bit (For M5)
Removal
1. Removing the FTP panel A
Remove the FTP panel A
(Refer to Section 2-7-4.)
2. Removing the guide plate assembly
Remove the four screws, and install the guide
plate assembly.
Installation
3. Installing the guide plate assembly
Install the guide plate assembly using the four
screws.
4. Installing the FTP panel A
Install the FTP panel removed in step 1.
(Refer to Section 2-7-4.)
FVS-1000 MMP1
Guide plate assembly
Screws
5 x 12
W5
Screws
5 x 12
4-8. Replacing the Guide Plate Assembly
W5
4-23
Advertisement
Table of Contents
