Table of Contents
Advertisement
3
Overview
Assumptions
U
SING THE
G
ATEWAY
This chapter describes how to use your web browser to access,
administer, configure, and manage your OfficeConnect Gateway from
the OfficeConnect Gateway web page. You can also view system settings
and monitor the performance of the unit from this web page.
The information in this chapter assumes the following:
You have set up, connected and configured your OfficeConnect
I
Gateway base unit and Voice Expansion unit (if applicable) as
described in your OfficeConnect Gateway Quick Start Guide(s).
You have configured your PC (workstation) for dynamic addressing,
I
and you have verified that your PC was assigned an IP address from
the OfficeConnect Gateway.
If you are using your Gateway in a Static IP Addressing environment,
please refer to Chapter 2, Getting Started In A Static IP Environment. By
default, the OfficeConnect Gateway is configured as a DHCP Server in
Smart DHCP Mode.
You know the User Name and Password for your OfficeConnect
I
Gateway. The default User Name is admin. There is no default
Password. Please change the default User Name and Password when
you initially configure the unit to values that are more appropriate for
your environment.
O
C
FFICE
ONNECT
Advertisement
Table of Contents
