3Com OfficeConnect 3CR100A97 User Manual page 32

2 - 6 C 2: G
HAPTER ETTING
S I A S IP E
TARTED N TATIC
12 In the LAN IP Address field, enter your workstation's original Gateway IP
address that you recorded earlier.
13 Click Apply.
14 Click SaveAll on the upper right portion of the menu bar to permanently
save your changes.
15 Quit your web browser.
16 Reset your workstation back to the original network settings you
recorded earlier.
17 Restart your workstation.
This completes the setup procedure for using a statically configured
workstation with the OfficeConnect Gateway.
For Windows NT 4.0 Users
1 From the Start menu, select Settings and then Control Panel.
2 Double-click Network, and then click the Protocols tab.
3 Highlight TCP/IP, and then click Properties.
4 Click the IP Address tab, and then select the Ethernet card associated
with the OfficeConnect Gateway from the Adapter drop-down list
box.
NVIRONMENT