To Modify A Vpn Route; To Delete A Vpn Route; Ip Pool Configuration - 3Com OfficeConnect 3CR100A97 User Manual

To Modify a
VPN Route
To Delete a
VPN Route
IP Pool
Configuration
To modify a VPN Route, perform the following steps:
1 From the VPN Tunnels section, select the name of the VPN Tunnel you
want to modify from the VPN Name drop-down menu.
2 From the VPN Routes section, select Modify from the Edit Mode
drop-down menu.
3 Modify the appropriate fields on the VPN Routes page.
4 When you have finished making your modifications, click Apply and then
click SaveAll on the OfficeConnect Gateway menu bar to permanently
save your configuration information.
To delete a VPN Route, perform the following steps:
1 From the VPN Tunnels section, select the name of the VPN Tunnel you
want to delete from the VPN Name drop-down menu.
2 From the VPN Routes section, select Delete from the Edit Mode
drop-down menu.
3 Click the Delete button and click OK when the system prompts you to
verify that you want to delete the VPN route.
4 Click Apply and then click SaveAll on the OfficeConnect Gateway menu
bar to permanently save your changes.
The IP Pool Configuration page lets a User with Administrator privilege
create, modify, or delete an IP Address Pool used by the OfficeConnect
Gateway or DHCP (Dynamic Host Control Protocol) server.
An IP Address Pool contains a range of IP addresses available for use by
the DHCP server. When the DHCP server receives a request for an IP
Address from a computer, the server will automatically allocate an unused
IP address from this address pool to the requesting computer.
The OfficeConnect Gateway functions as the DHCP Server unless you
specify another DHCP server on your network.
To access the IP Address Pool page, perform the following steps:

IP Pool Configuration 8 - 33